Bradford Built Inc
Rugby MFG.
CM Truck Beds 
Buyers Products
Boss Snow Plows

Anderson Truck Equipment

Formerly knowN as C & C Fab Shop 

Rugby Medium and Heavy Duty Dump Beds

Rugby Contractor Dump Body
Rugby's Contractor Body has convenient fold-down sides and is available in lengths of 12', 14' and 16' with volume capacities ranging from 4-6 cubic yards.

  • 12 gauge HSLAS grade 50 steel sides on fold down side bodies.
  • 10 gauge double wall sides on 14 foot fixed side body.
  • 7 gauge floor, standard on 14' and 16', optional on 12'.
  • 17" side height with brackets for sideboard extensions.
  • Fully boxed dirt shedding top rails.
  • 45 degree sloped rub rails.
  • Four vertical side braces per side.
  • Full depth boxed rear corner posts with concealed hardware for a clean, streamlined look.
  • Front panel includes a triple bend horizontal top rail.
  • 7" structural channel long sills and 3" i-beam cross sills on 12" centers.
  • Rugby products’ lighting locations have been designed to assist the installer in meeting FMVSS / CMVSS 108 requirements.
  • All appearance corners have radius bends.
  • 2 part epoxy primer.
  • ½ cab shield.

  • Independently operated double door sides with removable center post.
  • Single pin release system to quickly remove center post.
  • Each side door features centrally located quick release lever.
  • 2 or 3 heavy duty double strap greaseable hinges per door.

  • Tailgate sloped 10 degree inward.
  • New oval shaped stop/turn/tail light in rear corner posts.
  • EZ-LATCH™ upper hardware on tailgate. (patented)
  • 23" end height, four-way tailgate with adjustable rod on trip lever.
  • 10 gauge fully boxed tailgate frame with two vertical braces.
  • Reinforced decking edge at rear of the body.
  • 1 ¼" diameter top and 1" bottom hinge pins.

  • Coal chute door
  • Spreader Apron
  • LED lights

7" main frame structure with 3" I-beam cross members 12" on centers

Rugby Titan Dump Body
Designed to meet bigger capacity, class 5-7 needs, Titans feature a sleek yet strong look, a dirt-shedding top rail, 10 degree sloped tailgate & radius front corner posts.

  • 10 gauge steel (50 grade) on side construction.
  • 8 gauge steel floor with radius corners.
  • 10 foot 6-8 yard body standard all 8 gauge.
  • Sides equipped with brackets for sideboard extensions.
  • Fully boxed dirt-shedding top rail.
  • 45 degree sloped rub rail.
  • Three vertical boxed braces per side.
  • Radius front corner posts with recessed clearance lights on lower post.
  • Tapered Full height rear corner posts 5 inches deep.
  • Front has fully boxed top rail with v-bend reinforced front panel.
  • 7" structural channel long sills and 4" I beam cross sills on 12" centers.
  • Rugby products’ lighting locations have been designed to assist the installer in meeting FMVSS / CMVSS 108 requirements.
  • New oval-shaped stop/turn/tail lights in upper rear corner posts with side clearance lights on lower post.
  • 2 part epoxy primer.
  • All appearance corners have radius bends.
  • Sloped ½ cab shield.
  • Optional ¾ cab shield.
  • Optional all 8 gauge on 5/7 yard dump body.
  • Optional LED Lights available.

  • Sloped 10 degree inward and recessed flush with rear face of corner posts.
  • Two-way tailgate with adjustable rod on trip lever.
  • Fully boxed frame, reinforced with two tapered vertical braces and one tapered horizontal brace.
  • Angle iron reinforced decking at rear, ensures longer lasting gate seal.
  • Heavy duty 1.25" lower pins on tailgate, upper pivot arms are of .75" plate.
  • Grease fittings on upper pivot arms.
  • Equipped with spreader chains and banjo eye chain holders in corner posts.
  • Optional coal chute door.
  • Optional spreader apron.
  • Optional air tailgate.